[ICOM] 756ProIII PA Failure

[Joe Oski]

I concur in powering down the entire shack equipment when NOT OPERATING.
I use a dual 20amp (240VAC) Circuit breaker for my "peace-of-mind".
 
73
Joe O, KI5FJ

--- On Mon, 8/25/08, Jim Hargrave <w5ifp at gvtc.com> wrote:

From: Jim Hargrave <w5ifp at gvtc.com>
Subject: RE: [ICOM] 756ProIII PA Failure
To: "ICOM Reflector" <icom at mailman.qth.net>
Date: Monday, August 25, 2008, 12:51 PM

Another good reason for turning off "everything" when not in use and
especially in bad WX..

I installed two regular wall switches in my operating desk that kills all my
radio and computer power strips. That disables all the power supplies and
wall-warts.

   * 73's Jim W5IFP *


   >-----Original Message-----
   >From: icom-bounces at mailman.qth.net
   >[mailto:icom-bounces at mailman.qth.net]On Behalf Of Paul Manuel
   >Sent: Monday, August 25, 2008 12:34 PM
   >To: ICOM Reflector
   >Subject: Re: [ICOM] 756ProIII PA Failure
   >
   >
   >
   >
   >
   >--- On Mon, 8/25/08, Frank Haas KB4T <kb4t at arrl.net> wrote:
   >> I was surprised to find that power is applied to the PA all
   >> the time
   >> even with the rig turned off. I wonder if this is a good
   >> practice?
   >
   >Good practice or not, it is normal practice in nearly all,
   >perhaps all, modern radios.
   >
   >73, Paul K4PDM
   >
   >
   >
   >----
   >Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
   >Icom Users Net: Sundays, 1700Z, 14.316 MHz
   >Icom FAQ: http://www.qsl.net/icom/
   >No virus found in this incoming message.
   >Checked by AVG - http://www.avg.com
   >Version: 8.0.138 / Virus Database: 270.6.7/1628 - Release Date:
   >8/22/2008 6:32 PM
   >

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/