[ICOM] IC-735

[Igor Sokolov]

Thank you Bill. I know about CI-V converter. I have several other Icom
radios. What is the  default address and baud rate of IC-735? There is no
information in the user manual.

My 500 Hz filter is probably faulty. Being tuned to the same CW signal wide
filter makes the S-meter show 9 S units. Switching to narrow 500 Hz  filter
the S meter shows 4-5 S units.

73, Igor UA9CDC
----- Original Message -----
From: "AI4WM" <de.ai4wm at gmail.com>
To: <icom at mailman.qth.net>
Sent: Monday, October 15, 2007 1:02 AM
Subject: [ICOM] IC-735


: Igor,
: If you want to use the IC-735 with a PC you need the CT-17, CI-V
converter.
: The filter should not cause that much loss in sensitivity.  Mine causes a
: slight loss, but
: only about 1 or 2 Db.  The filter should only affect selectivity giving a
: sharper pass band.
: In the case of the 500Hz filter a pass band of only 500 HZ.
:
: The FL-63A is a very narrow band of 250HZ and that filter will cause a
drop
: in sensitivity
: because it is so very sharp.  The loss is not a true loss as long as you
are
: tuned within the
: BW of the filter.  In the passband it has little loss.  I do not use the
: FL-63A
:
: Inrad can supply the correct filter for your rig.
:
: I found both the operator manual and the service manual for the IC-735 on
: the internet.
: If you need manuals and cannot find a copy on the web email me and I will
: forward copies on a CD to you.
:
: 73,
: Bill
:
: --
: 73,
: Bill
: AI4WM
: ----
: Your Moderator: Dick Flanagan K7VC,
: (and temporarily N8TFD/Steve): icom-owner at mailman.qth.net
: Icom Users Net: Sundays, 1700Z, 14.316 MHz
: Icom FAQ: http://www.qsl.net/icom/