[ICOM] IC-775DSP + Heil PR40?

[Anders Janis SM4RNA]

Or you can use my mic amp mod posted on www.mods.dk


de Anders



----- Original Message ----- 
From: "Hans Remeeus" <hans at remeeus.nl>
To: "ICOM Reflector" <icom at mailman.qth.net>
Cc: <IC-775DSP at yahoogroups.com>
Sent: Saturday, October 13, 2007 9:19 PM
Subject: Re: [ICOM] IC-775DSP + Heil PR40?


> This was the answer from Bob:
> 
> 
> Thanks for your note.  I have discovered over the years that the 775 is 
> one of the best transceivers technically that Icom ever built, HOWEVER, 
> the jewel needs some additional microphone input gain.
> 
> Here's the secret to making it come alive - big time. Use a little 50 
> dollar Behringer UB 802 mixer/EQ/Preamp or one of the W2IHY 8 band EQ 
> with the PR 40 in front and the 775 will be magnificent.
> 
> Hope this helps, Hans.
> 
> 73
> BOB HEIL, K9EID
> 
> ---
> 73,
> Hans Remeeus (PA1HR)
> http://www.remeeus.eu
> Communication is about people, the rest is technology.
> 
> 
> 
> Hans Remeeus schreef:
>> 
>> Good day,
>> 
>> Today I received the Heil PR40 for my IC-775DSP.
>> 
>> Is it possible to connect this dynamic microphone strait forward, or do 
>> I have to install a capacitor or others in the line?
>> 
>> Thanks in advance and 73 from PA-country where the WX today was very 
>> sunny and warm (temp >20C = about 70F)...
>> 
>> 
>> 
> ----
> Your Moderator: Dick Flanagan K7VC, 
> (and temporarily N8TFD/Steve): icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/