[ICOM] Carry Handle

[Donald Sanders]

Fantastic. Enjoy your IC735. BTW, I found an Italian with keyer modules and
I will order one for my second unit. I will go mobile CW again.

Healthfully yours,
                          Don W4BWS
----- Original Message ----- 
From: "Gary Nichols" <kd9sv at comcast.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Saturday, May 26, 2007 5:22 PM
Subject: RE: [ICOM] Carry Handle


> All better now Don, whoever installed the CW filter didn't clip off the
> excess leads and they were shorting out to the chassis.  Everything seems
to
> be working normal now...73, de gary
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On
> Behalf Of Donald Sanders
> Sent: Saturday, May 26, 2007 5:13 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] Carry Handle
>
> Gary, check the internal jumpers for the filters.Someone may have removed
> the CW filter and not changed the filter jumpers. Good luck, I have 2 Icom
> 735's and love them.
>
> Healthfully yours,
>                           Don W4BWS
> ----- Original Message ----- 
> From: "Gary Nichols" <kd9sv at comcast.net>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Saturday, May 26, 2007 12:18 PM
> Subject: RE: [ICOM] Carry Handle
>
>
> > Blair, will do...it looks like the screw spacing is closer on the 735
but
> > perhaps the handle can be shortened to fit...will let you know about
that.
> > Can you tell me if the CW filters are plugged in or soldered in?  I just
> > bought this 735 and it has the FL63A filter but in the narrow CW
position
> > the audio is dead.  Also the RIT does not appear to function...hope I
> didn't
> > get a defective unit here.  CW output seems to be ok and the keyer works
> > like it should.  Any suggestions about the filter would be helpful...de
> gary
> >
> > -----Original Message-----
> > From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
> On
> > Behalf Of ynkedragon at aol.com
> > Sent: Friday, May 25, 2007 10:40 AM
> > To: icom at mailman.qth.net
> > Subject: Re: [ICOM] Carry Handle
> >
> > If the MB-23 fits the '735 would you please post that information here.
> >  I'm interested in adding a carry handle to mine.
> >
> > 73, Blair K3YD
> >
> >
> > -----Original Message-----
> > From: Gary Nichols <kd9sv at comcast.net>
> > To: 'ICOM Reflector' <icom at mailman.qth.net>
> > Sent: Thu, 24 May 2007 3:28 pm
> > Subject: RE: [ICOM] Carry Handle
> >
> >
> >
> > Thanks Gary, I know the MB-23 fit the 725 so I suspect it would also
> > fit the
> > 735 and 746pro but not sure about the 751 as it was a little bigger
> > radio.
> > I ordered 3 of them from Universal Radio and if they don't fit will send
> > them back...de gary, kd9sv
> >
> > -----Original Message-----
> >  From: icom-bounces at mailman.qth.net
> > [mailto:icom-bounces at mailman.qth.net] On
> > Behalf Of Gary P. Fiber
> > Sent: Thursday, May 24, 2007 5:18 PM
> > To: ICOM Reflector
> > Subject: Re: [ICOM] Carry Handle
> >
> > Gary,
> >
> > The MB-23 fits the IC-718 and I suspect the 746Pro too.
> > I don't remember an accessory carry handle for the IC-735 and forget if
> > the IC-751A came with one.
> > The MB-23 possibly could be utilized for all the radios you listed but
> > you may have to use some improvised mounting screws and hardware.
> >
> > Gary K8IZ
> >
> > Gary Nichols wrote:
> > > I am looking for a source of carry handles for a couple different Icom
> > > radios, the 735, 746pro and 751A and am not finding anything online.
> > Anyone
> > > on the reflector know of a source for these please respond off line.
> > >
> > > Thanks in advance, de gary, kd9sv
> > >
> > > ----
> > > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> > > .
> > >
> > >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> > ________________________________________________________________________
> > AOL now offers free email to everyone.  Find out more about what's free
> > from AOL at AOL.com.
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>