[ICOM] Help with SM-20

[Mike K9MI]

Have you verified that the plug is wired correctly or the wire for the audio 
is connected? If you haven't already, make sure the mic is wired correctly 
and usually the white wire is for audio.

Good luck...

73, Mike K9MI


----- Original Message ----- 
From: "Doug Shields" <w4das at comcast.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, May 04, 2007 02:05
Subject: [ICOM] Help with SM-20


> Hello everyone,
>     I just received an "excellent condition" SM-20 microphone.
> Unfortunately, there is no output from the mic.  Pushing the PTT button 
> puts
> my radio into transmit mode but there is no audio.  Is there a good method
> for testing the mic element?  Any hints or suggestions on how to approach
> this?  Does anyone know if I can get just a replacement element from Icom?
> Any help would be appreciated.
>
> Doug  W4DAS
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>