[ICOM] UT-102 differences?

[Mike - KD9KC]

A dumb question.  Can you change the caps to units with longer leads and
fold them down on the board?  Just my first thought, if you have no luck
finding what you need.

Good luck.

Mike - KD9KC.
M.A.R.I.E.
El Paso, Tx. 
www.w5dpd.org

=============================================
The United States Constitution (c) 1791. All Rights reserved.
=============================================


 

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Doug Shields
> Sent: Tuesday, March 20, 2007 4:45 AM
> To: ICOM Reflector
> Subject: [ICOM] UT-102 differences?
> 
> Hello all,
>     I just found that there are at least two different versions of the
> UT-102 voice synthesizer.  I have a UT-102 that mounts 
> perpendicular to the main board.  On my new IC-746Pro this 
> UT-102 will not fit.  There are two electrolytic capacitors 
> that will not allow the UT-102 to plug in properly.
> Apparently there is another version of the UT-102 that mounts 
> parallel to the main board.
>     Is there any method (other than looking at the connector) 
> to distinguish one version from another?  Might someone have 
> a parallel mounting UT-102 that would like to trade for one 
> that mounts perpendicular?  Please contact me at w4das at arrl.net.
> 
> Doug  W4DAS
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/