[ICOM] 706mk2
Paul Gates, KD3JF
pearly732003 at yahoo.com
Sun Jan 7 10:18:50 EST 2007
It comes as an accessory and the customer installs it. The DSP is not as good as the W4RT's DSP and I am going to install that DSP in my G.
John Geiger <johngeig at yahoo.com> wrote: I believe that some of the 706MKIIGs sold in other
countries (Japan comes to mind) did not have the DSP
module as standard. All MKIIGs sold in the US came
with it, I believe.
73s John W5TD
--- Jim Miller wrote:
> Were some of the 706 Mk II G 's built without the
> ut-106?
> Can I tell if mine has it in without opening the
> radio?
> Is there a published serial split?
> What does it look like and where is it?
> What do I see if it ISN'T installed?
>
> 73, Jim
>
> ----- Original Message -----
> From: "D C *Mac* Macdonald"
> To:
> Sent: Saturday, January 06, 2007 10:47 AM
> Subject: Re: [ICOM] 706mk2
>
>
> > I finally got around to installing the UT-106 that
> I
> > have had almost as long as Mk II that I bought new
> > before the DSP was included.
> >
> > I also installed the FL-232 (350 Hz CW) and FL-223
> > (1.9 kHz SSB) filters. What an improvement!!!
> >
> > Somewhere around here, I also have the speech unit
> > to install.
> >
> > Mac - K2GKK
> > Oklahoma City, OK
> >
> >
> > ----Original Message Follows----
> > From: Gary Fiber
> > Subject: Re: [ICOM] 706mk2
> > Date: Sat, 06 Jan 2007 08:35:38 -0800
> >
> > The UT-106 installs into an IC-706MKII, I have one
> with a
> > UT-106 installed. After a while it was included
> as standard
> > into the rig.
> >
> > The IC-706MKIIG had the UT-106 installed from the
> factory
> >
> > The UT-106 Will NOT install in the original IC-706
> however.
> >
> > Gary K8IZ
> >
> >
> > [ José=LU1ARV ] wrote:
> > >Hi Hi! For what I see in the manual, the UT-106,
> it is not possible to
> > >install it in the IC-706MKII. Is it correct? I
> don't want to open my
> > >"new" rig.
> > >Thank you!
> > >José/73
> >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
More information about the Icom
mailing list