[ICOM] IC-706 Set Mode Problem

[John Germanos]

TNX response but the problem is, the changes are not remembered. Any 
thoughts would be appreciated.

John WB9PNU

----- Original Message ----- 
From: "roncasa" <roncasa at verizon.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, August 26, 2007 4:27 PM
Subject: Re: [ICOM] IC-706 Set Mode Problem


> John Germanos wrote:
>> I am having trouble with my 706MkIIG. If I change something in Initial 
>> Set Mode, it is not remembered. Tried CPU reset, but did not help. Trying 
>> to set up a new filter I added.
>>
>
> refer to page 51 in owner's manual:
>
> while pushing power on, press and hold down "lock"
>
> turn tuning dial to number "9" or "10" depending on filter location;
>
> select filter
>
> press and hold down power button till radio goes off.
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 
> 269.12.8/973 - Release Date: 8/25/2007 5:00 PM
>
>