[ICOM] IC-746 no TX/RX on HF bands

[Bert Almemo]

Hi Guillermo,

Thanks for reply. I really appreciate your help. Looking forward to hearing
from you again. Thanks!

73 Bert, VE3OBU
 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of GGLL
Sent: Thursday, September 28, 2006 8:24 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC-746 no TX/RX on HF bands

	Bert, the problem with IC151 involves TX only;  your 746 problem
maybe other, probably an unlocked or not working at all oscillator (common
to both RX and Tx). Surprisingly, it works at 2. That's interesting, will
check the schematics.

Best regards
Guillermo - LU8EYW.

Bert Almemo escribió:
> I didn't get any response to my posting so I'll try again. Maybe it 
> didn't make it to the reflector.
> 
> 73 Bert
> 
> 
> I have acquired a "sick" 746, not pro, that has no power out and no 
> receive signal on all HF bands. I want to fix it but don't know where 
> to start. It works fine on 2 meters.
> 
> According to previous owner the IC151 and some discret components has 
> been replaced twice but the problem still remains. I've heard about 
> the problem with IC151 before but there has to be other components 
> involved with this problem. Would appreciate your suggestions and
comments. Thanks.
> 
> 73 Bert, VE3OBU
> 
> ----
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/