[ICOM] Bad TX audio on 775

[Art]

It's a Mitsubishi electronic volume control, zero to 82 BD attenuation.

Working on a spec sheet, stay tuned.

Art

At 06:01 AM 10/14/2006, you wrote:

>Posting this for a friend:
>His 775 got some distorted audio on TX. Careful tracing led  him to suspect
>IC8 M5282FP audio amp.
>Service manual says pin 2 of the IC should be at 3.8V while in practice it
>is only 2.6V.
>Does anybody know where  I can get data sheet on the IC?  Where one can get
>this IC from? Do you thing it is the IC or  rather some parts (resistors,
>capacitors) associated with this IC?
>Any help would be appreciated.
>
>73, Igor UA9CDC
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 10/13/2006
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 10/13/2006


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.408 / Virus Database: 268.13.3/474 - Release Date: 10/13/2006