[ICOM] ICOM IC706MKII

Jim's mail jamesgood at dfwonline.net
Thu Oct 5 21:23:33 EDT 2006


Sir,

I also seem to have a problem with an IC 706 MK II G.  Yesterday the radio 
worked just fine.  The radio has been modified for MARS operations.  Over 90 
% of the time, the RF  power setting is at or below 8 (approximately 80 
watts HF SSB).  The power is from an Astron supply.  A measurement this 
evening at the power out of the supple showed about 14.16 vdc.  A check on 
each of the pins of the radio end of the power cable gave the same reading. 
I had thought a possible blown fuse in the power line.  The weather here 
today has been clear, no storms or lightening.  The Astron power supply will 
turn on as it should.  But the 706 does nothing when the power button is 
pressed.  Still nothing when the power button and any combination of other 
buttons/keys are pressed at the same time on power on.  I have the owners 
manual but not the service manual.  Before there is too much damage done to 
this radio, where should I start looking and what should I be looking for?

Thank you,
Jim Good KD5VXH


----- Original Message ----- 
From: "Clif Holland" <radio.service at verizon.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Monday, September 25, 2006 8:32 PM
Subject: Re: [ICOM] ICOM IC706MKII WON'T DO SIX METERS!


> Have you reset it? That's the first thing to do with a new (to you) rig.
>
> Clif Holland KA5IPF
> www.avvid.com
>
>
>
>



More information about the Icom mailing list