[ICOM] Help, Nardo Ram unit for 271A

[Walter S. Szachara]

Hi Clif...

My Nardo Board for the IC-271 has no jumpers installed -- my Nardo Board for 
the IC-471A has a jumper installed in the "0" pair...

Hope this helps...

Regards,

Walt, W2OKF


----- Original Message ----- 
From: "Clif Holland" <radio.service at verizon.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, May 21, 2006 12:09 PM
Subject: [ICOM] Help, Nardo Ram unit for 271A


>I have a Roberto Nardo Ram Unit for the R71A and need to jumper it for the 
>271A. Does anyone have a 271 board they can check the jumper settings on? 
>If you don't know about the jumpers they are on the connector side of the 
>board. They are 3 pair of holes labelled 0, 1, & 2. I realize there are 
>only 9 possibilities but I don't have a 271 here at the moment to try it.
>
> Thanks
>
> Roberto isn't answering e-mail.
>
> Clif Holland KA5IPF
> www.avvid.com
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>