[ICOM] PW-1 What does this mean?

[Tony Visco]

Thanks for the suggestion Harry,

 

But

 

It didn't work. 

That is I reset the PW-1 as in the start up procedures for it to acquire
information from my Icom 746pro.  I have also tried tuning the antenna under
reduced power without any luck.  The Amp protect is still activated
instantly.  

 

Might there be any other suggestions. 

 

Tony W3EW  

 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of we1x at comcast.net
Sent: Saturday, March 04, 2006 9:36 AM
To: ICOM Reflector
Subject: RE: [ICOM] PW-1 What does this mean?

 

Tony,

 

Try a full reset and see what happens.

 

Harry WE1X

 

-------------- Original message -------------- 

From: "Tony Visco" <ahv73 at verizon.net> 

 

> Fellow Hams, 

> The ole PW-1 seems to have come up with another problem. Tonight when 

> operating on any band the Amp/Protect circuit activates rendering the
linear 

> useless each time I attempt to use it. 

> 

> The Auto lamp blinks which according to the manual on page 14 indicates
that 

> "The Power Level of the 4 PA unites becomes unbalanced." 

> OK - but everything was working just fine yesterday now its not today? 

> 

> How would the PA units have become unbalanced and what measures need to be


> taken to correct this issue. 

> 

> I'm using an Icom 746pro as my primary exciter. 

> 

> Thanks in advance for the divine guidance. 

> 

> Tony W3EW 

> 

> ---- 

> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net 

> Icom Users Net: Sundays, 1700Z, 14.316 MHz 

> Icom FAQ: http://www.qsl.net/icom/ 

----

Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net

Icom Users Net: Sundays, 1700Z, 14.316 MHz

Icom FAQ: http://www.qsl.net/icom/