[ICOM] Icom 761 / 765 Advice needed

[Andre van Wyk]

Hi Al,
Email me direct (k4wpx at arrl.net) so we can discuss this.
Many thanks
Andre K4WPX

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Alan Leith
Sent: Wednesday, June 14, 2006 6:55 PM
To: ICOM Reflector
Subject: Re: [ICOM] Icom 761 / 765 Advice needed

I assume you mean the 23 buttons on either side of the dial.  I may 
have a set for the 761.  What are you proposing?

73

Al, VE1AL
___________

At 07:40 PM 6/14/2006, you wrote:

>Hi to all,
>
>I am in the process of restoring an old Icom 761 Transceiver. This radio
has
>sentimental value to me and I need to replace all the buttons on the face
>plate as the silkscreen had been worn off during the years. Icom America
>tells me these parts are no longer available, so I am desperately looking
>for a parts radio.
>
>The band change buttons as well as the mode buttons are not readable
>anymore.
>
>Either the 761 or 765 would do. I really only need the buttons, but will
buy
>an entire radio too.
>
>Any suggestions?
>
>73
>
>Andre K4WPX
>
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.385 / Virus Database: 268.8.4/363 - Release Date: 6/13/2006


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.385 / Virus Database: 268.8.4/363 - Release Date: 6/13/2006

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/