[ICOM] IC-706MKIIG & CT-17

[Pete ....]

Well, tell that to the radio then. 04h is what shows
up on the window when setting the address.
Peter NH6VB

--- W7RY <w7ry at centurytel.net> wrote:

> No, actually if it is written 04h, then the hex
> address is 04.
> 
> The h indicates that it's hex. Nothing else. Just
> like feet, or inches
> etc.
> 
> In the below example the address is 48 just as he
> has written it.
> 
> 73
> Jim W7RY
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net]
> On Behalf Of Pete ....
> Sent: Monday, June 12, 2006 9:29 PM
> To: ICOM Reflector
> Subject: RE: [ICOM] IC-706MKIIG & CT-17
> 
> Alan,
> 04H, Zero four Hotel is the hex address!
> 73
> Peter NH6VB
> 
> --- N5PA <n5pa at n5pa.com> wrote:
> 
> > Well, I changed the baud rate to 4800 and then
> 9600
> > and DX4WIN and WriteLog
> > still do not see the radio.  It times out trying
> to
> > connect to the radio.
> > The hex address is set to 48 and it still does not
> > work.
> > 
> > Alan Clark, N5PA
> > 4025 Craft Lane
> > Laurel, MS  39440-1268
> > E-Mail: n5pa at n5pa.com
> > URL: http://www.n5pa.com
> > 
> > 
> > 
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> > icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com