[ICOM] IC-706MKIIG & CT-17

[W7RY]

No, actually if it is written 04h, then the hex address is 04.

The h indicates that it's hex. Nothing else. Just like feet, or inches
etc.

In the below example the address is 48 just as he has written it.

73
Jim W7RY


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On Behalf Of Pete ....
Sent: Monday, June 12, 2006 9:29 PM
To: ICOM Reflector
Subject: RE: [ICOM] IC-706MKIIG & CT-17

Alan,
04H, Zero four Hotel is the hex address!
73
Peter NH6VB

--- N5PA <n5pa at n5pa.com> wrote:

> Well, I changed the baud rate to 4800 and then 9600
> and DX4WIN and WriteLog
> still do not see the radio.  It times out trying to
> connect to the radio.
> The hex address is set to 48 and it still does not
> work.
> 
> Alan Clark, N5PA
> 4025 Craft Lane
> Laurel, MS  39440-1268
> E-Mail: n5pa at n5pa.com
> URL: http://www.n5pa.com
> 
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/