[ICOM] 706MKIIG

[Bill Archer]

Gordon,

Try
transcieve = off
stop bits = 1

also try cycling DTR and RTS to high, some interfaces draw power from 
one of these pins.

Hope this helps

Bill

Gordon Bostrom wrote:

>One more time. I am still having trouble with the ct setup to the 706MKIIG.
>so here is my settings
>Radio= 706MKII
>CT-17
>running XP on computer
>radio settings from 706MKIIG menu:
>CIV Address=hex 58
>Baud rate = 9600
>Transcieve= ON
>Freq data set= OFF
>Program is LOGGER32 latest ver:
>Comm port= 1
>not IC-735
>Data bit= 8
>Stop bit= 2
>Parity = none
>Icom hex +58
>Polling= 400
>.The computer shows polling in the Radio debug window, but NO freq
>
>Am sure hoping some one can help (the ct-17 was checked on another radio at w8cnl's qth and checked good)
>
>73 Gordon W4KYW
>
>Forget about yesterday dont worry about tomorrow live for today
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>  
>