[ICOM] 756 Pro No power out

[MikeR]

Bonddaleena at aol.com wrote:
> In a message dated 2/9/2006 8:12:26 PM Eastern  Standard Time, 
> w0hfg at hotmail.com writes:
> I just worked 3Y0X on 15 meters  about 3 pm this afternoon and then about 5 
> pm I noticed they were on 20  meters. I started calling and noticed I didn't 
> have much power out. I'm  driving a 4KL amp with about 40 watts. I stopped 
> and checked all bands an I  only have about 2 - 5 watts out with the RF Power 
> control fully clockwise..  I disconnected the coax from the rig and attached 
> a bird 43 to a DummyLoad  to make the power readings. 5 watts out on 40 & 80 
> and 2 watts out on  20,15 & 160. Didn't check 10 or 6 meters. No smoke no 
> noise just no  power out.. Rx works fine. Tx spike on the spectrum scope 
> looks fine..  Haven't looked inside yet..
> Anyone have any ideas where to  check first ???
>
> Thanks,   Jim / W0HFG
If you were on phone, un-plug the mic and plug it back in. Works on my 
Pro II.
GL & 73
Mike NF4L