[ICOM] 756 Pro No power out

[Bonddaleena at aol.com]

In a message dated 2/9/2006 9:05:51 PM Eastern  Standard Time, 
w0hfg at hotmail.com writes:
Antenna port is selected #1..   3 watts out on 6meters  on port 2... Fuse is 
OK in the PA. Can't see  anything visual wrong inside top cover.. Have 13.69 
volts to the PA  fuse..     Jim


>From:  Bonddaleena at aol.com
>Reply-To: ICOM Reflector  <icom at mailman.qth.net>
>To: icom at mailman.qth.net
>Subject: Re:  [ICOM] 756 Pro No power out
>Date: Thu, 9 Feb 2006 20:41:03  EST
>
>In a message dated 2/9/2006 8:12:26 PM Eastern  Standard  Time,
>w0hfg at hotmail.com writes:
>I just worked 3Y0X on 15  meters  about 3 pm this afternoon and then about 5
>pm I noticed they  were on 20  meters. I started calling and noticed I  
>didn't
>have much power out. I'm  driving a 4KL amp with  about 40 watts. I stopped
>and checked all bands an I  only have  about 2 - 5 watts out with the RF 
>Power
>control fully  clockwise..  I disconnected the coax from the rig and  
>attached
>a bird 43 to a DummyLoad  to make the power  readings. 5 watts out on 40 & 
>80
>and 2 watts out on   20,15 & 160. Didn't check 10 or 6 meters. No smoke no
>noise just  no  power out.. Rx works fine. Tx spike on the spectrum scope
>looks  fine..  Haven't looked inside yet..
>Anyone have any ideas where  to  check first ???
>
>Thanks,   Jim /  W0HFG
>
>
>----
>Your  Moderator: Dick Flanagan  K7VC, icom-owner at mailman.qth.net
>Icom Users Net:  Sundays, 1700Z,  14.316 MHz
>Icom FAQ: _http://www.qsl.net/icom/_  (http://www.qsl.net/icom/)
>
>
>Without being a smart a--,  what about the selected antenna  port?
>
>
>ron
>
>N4UE
>----
>Your  Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net:  Sundays, 1700Z, 14.316 MHz
>Icom FAQ:  http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC,  icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom  FAQ: _http://www.qsl.net/icom/_ (http://www.qsl.net/icom/)   



Adam? We need you expertise.....
 
 
ron