[ICOM] IC-706MkIIG Speech

[Jim Miller]

Hard to believe a person can't stick in a pot or resister and get it to
where you want.

73, Jim

----- Original Message ----- 
From: "Ken Winterling" <wa2lbi at frontiernet.net>
To: <icom at mailman.qth.net>
Sent: Thursday, December 28, 2006 9:40 AM
Subject: [ICOM] IC-706MkIIG Speech


> Clete,
>
> I believe the only controls for the UT-102 are the language (English
> or Japanese), the speed of the speech (fast or slow), and whether it
> reads out just the frequency and mode or the frequency, mode and S
> meter level.  The volume of the synthesizer is tied to the volume
> control on the front panel.
>
> If anybody knows differently please advise.
>
> Ken, WA2LBI
>
>
> On 12/28/06, C Whitaker <whitaker at pa.net> wrote:
> > de WB2CPN
> > Anyone know how to adjust the volume
> > of the UT-102 Speech Synthesizer Unit?
> > This one is much too loud.  The "Beep/Side
> > Tone" adjustment doesn't do it.
> > Tnx   73   Clete
> >
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>