[-] Re: [ICOM] Re ; Tuning Knob on Icom Ic765

[Gareth]

Paul Playford wrote:
> WD-40 is good for many things.  Starting fires (as a blow torch), 
> redistributing ink on dot matrix printer ribbons, dis-assembling 
> aluminum tubing, hand cleaner.
>
> NG for lubricating tho.
>
> de Paul, W8AEF
>
> ----- Original Message ----- From: "Mike Olbrisch" <mike2004 at elp.rr.com>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Monday, December 04, 2006 7:02 PM
> Subject: RE: [-] Re: [ICOM] Re ; Tuning Knob on Icom Ic765
>
>
>>
>> Please - if you want it to keep working - DO NOT use WD-40.
>>
>> When will the lubrication property myth of this stuff end?
>>
>> WD stands for Water Displacement.  It IS NOT a lubricant.
>>
>> Before you really gum up your radio - spray some WD-40 in a screwdriver.
>> Put it on good and thick.  Then let it set up for a few weeks.  See 
>> whet you
>> get then the propellant dissipates.
>>
>> WD-40 will work, but you need to re-apply it every few days.  Somehow it
>> seems to me you are looking for a bit more longevity here.
>>
>> Mike.  KD9KC
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
If you want a good spray lubricant that will last use Tri-Flow.   Spray 
this into your car and house locks and watch them work. I use it for 
most everything. Take it it from a locksmith.

de N1MSV