[ICOM] Icom IC-706MKIIG

[AD5VJ Bob]

Yes I did all the preliminaries. 

No output all modes on HF only output is on 2M and 440. 

  73 fer nw,
Bob AD5VJ(AAR6VM)
http://www.ad5vj.com/

Member CTDXCC
10X# 37210, FP#-1141
SMIRK#-5177, RARS #-149


> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael P. Olbrisch
> Sent: Monday, August 07, 2006 11:22 PM
> To: 'ICOM Reflector'
> Subject: RE: [ICOM] Icom IC-706MKIIG
> 
>  
> IIRC - the internal low-amp fuse has nothing to do with the 
> final output.
> If you remove it, the radio will likely not function at all.
> 
> I assume you did all the usual?  Tested on dummy load?  Good 
> clean 20+ amp power source?  Nice clean tight power 
> connections?  Mic goes to PTT ok?  No power out in ANY mode 
> or just SSB?
> 
> Good luck.
> 
> Mike.  KD9KC
> 
> 
> > -----Original Message-----
> > From: icom-bounces at mailman.qth.net
> > [mailto:icom-bounces at mailman.qth.net] On Behalf Of AD5VJ Bob
> > Sent: Tuesday, August 08, 2006 3:58 AM
> > To: 'ICOM Reflector'
> > Subject: RE: [ICOM] Icom IC-706MKIIG
> > 
> > Checks out ok and double checked it is in fact a 4 amp.
> > 
> >   73 fer nw,
> > Bob AD5VJ(AAR6VM)
> > http://www.ad5vj.com/
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>