[ICOM] Need Info on 4KL amp

[jim fox]

Dave,
   Whoops,,,, I told you about the wrong end....The pictorial shows the 
Black or Ground is connected directly to the PCB just like you thot.. The 
Red goes to the  first terminal (closest to rear of RF deck)    Jim/W0HFG


>From: "jim fox" <w0hfg at hotmail.com>
>Reply-To: ICOM Reflector <icom at mailman.qth.net>
>To: icom at mailman.qth.net
>Subject: RE: [ICOM] Need Info on 4KL amp
>Date: Sun, 25 Sep 2005 14:40:31 -1000
>
>Dave,
>     Got out my manual on my 4KL and the "+" is connected to the terminal 
>strip at the terminal closest to the front of the Power Supply.. The "-" is 
>to the other one... Hope this helps..
>73,  Jim /W0HFG
>
>
>>From: "Dave Meitzen" <dmeitzen at comcast.net>
>>Reply-To: ICOM Reflector <icom at mailman.qth.net>
>>To: "ICOM Reflector" <icom at mailman.qth.net>
>>Subject: RE: [ICOM] Need Info on 4KL amp
>>Date: Sun, 25 Sep 2005 15:34:53 -0500
>>
>>The service manual that I down loaded does not have a pictorial of the
>>connected unit. My repo manual seems to show the amp deck power 
>>connections
>>so if someone out there has an original manual please look at it and see 
>>if
>>you can tell. Right now it looks like the red connects to the terminal 
>>board
>>and the black directly to the PA PCB ground plane.
>>
>>Thanks
>>Dave
>>
>>-----Original Message-----
>>From: icom-bounces at mailman.qth.net
>>[mailto:icom-bounces at mailman.qth.net]On Behalf Of Dave Meitzen
>>Sent: Sunday, September 25, 2005 2:37 PM
>>To: ICOM Reflector
>>Subject: RE: [ICOM] Need Info on 4KL amp
>>
>>
>>Thank you Adam!!
>>Best Regards
>>Dave
>>
>>-----Original Message-----
>>From: icom-bounces at mailman.qth.net
>>[mailto:icom-bounces at mailman.qth.net]On Behalf Of Adam Farson
>>Sent: Sunday, September 25, 2005 12:44 PM
>>To: 'ICOM Reflector'
>>Subject: RE: [ICOM] Need Info on 4KL amp
>>
>>
>>Hi Dave,
>>
>>You can download the IC-4KL service manual here:
>>
>>http://www.qsl.net/icom/manuals.html
>>
>>
>>Cheers for now, 73,
>>Adam VA7OJ/AB4OJ
>>
>>
>>-----Original Message-----
>>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] 
>>On
>>Behalf Of Dave Meitzen
>>Sent: 25 September 2005 10:40
>>To: ICOM Reflector
>>Subject: [ICOM] Need Info on 4KL amp
>>
>>I just received this amp and the previous person when separating the amp
>>deck from the power supply did not remove the power connection from the
>>power supply (where it is well marked) but removed the red and black power
>>connection from the amplifier deck. It is not immediately obvious where 
>>the
>>connection points to the amp deck are so I thought I would ask this 
>>esteemed
>>group for advice. I do not want to connected it incorrectly.
>>
>>Thanks for taking the time.
>>Best Regards
>>Dave
>>
>>
>>
>>
>>Scanned for viruses by Blue Coat
>>http://www.WinProxy.com/
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/