[ICOM] Need Info on 4KL amp

[jim fox]

Dave,
     Got out my manual on my 4KL and the "+" is connected to the terminal 
strip at the terminal closest to the front of the Power Supply.. The "-" is 
to the other one... Hope this helps..
73,  Jim /W0HFG


>From: "Dave Meitzen" <dmeitzen at comcast.net>
>Reply-To: ICOM Reflector <icom at mailman.qth.net>
>To: "ICOM Reflector" <icom at mailman.qth.net>
>Subject: RE: [ICOM] Need Info on 4KL amp
>Date: Sun, 25 Sep 2005 15:34:53 -0500
>
>The service manual that I down loaded does not have a pictorial of the
>connected unit. My repo manual seems to show the amp deck power connections
>so if someone out there has an original manual please look at it and see if
>you can tell. Right now it looks like the red connects to the terminal 
>board
>and the black directly to the PA PCB ground plane.
>
>Thanks
>Dave
>
>-----Original Message-----
>From: icom-bounces at mailman.qth.net
>[mailto:icom-bounces at mailman.qth.net]On Behalf Of Dave Meitzen
>Sent: Sunday, September 25, 2005 2:37 PM
>To: ICOM Reflector
>Subject: RE: [ICOM] Need Info on 4KL amp
>
>
>Thank you Adam!!
>Best Regards
>Dave
>
>-----Original Message-----
>From: icom-bounces at mailman.qth.net
>[mailto:icom-bounces at mailman.qth.net]On Behalf Of Adam Farson
>Sent: Sunday, September 25, 2005 12:44 PM
>To: 'ICOM Reflector'
>Subject: RE: [ICOM] Need Info on 4KL amp
>
>
>Hi Dave,
>
>You can download the IC-4KL service manual here:
>
>http://www.qsl.net/icom/manuals.html
>
>
>Cheers for now, 73,
>Adam VA7OJ/AB4OJ
>
>
>-----Original Message-----
>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
>Behalf Of Dave Meitzen
>Sent: 25 September 2005 10:40
>To: ICOM Reflector
>Subject: [ICOM] Need Info on 4KL amp
>
>I just received this amp and the previous person when separating the amp
>deck from the power supply did not remove the power connection from the
>power supply (where it is well marked) but removed the red and black power
>connection from the amplifier deck. It is not immediately obvious where the
>connection points to the amp deck are so I thought I would ask this 
>esteemed
>group for advice. I do not want to connected it incorrectly.
>
>Thanks for taking the time.
>Best Regards
>Dave
>
>
>
>
>Scanned for viruses by Blue Coat
>http://www.WinProxy.com/
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/