[ICOM] 756 pro II goes to max power on 6m

[John Geiger]

Sounds like it is going into self oscillation when you are on 6.  I have had
other rigs do this also.  Try opening the case and tightening all circuit
board screws. That may fix it, or it may require a trip back to Icom.

73s John NE0P

----- Original Message -----
From: "Richard Hicks" <K4UTE at comcast.net>
To: "Icom" <icom at mailman.qth.net>
Sent: Saturday, September 10, 2005 1:44 AM
Subject: [ICOM] 756 pro II goes to max power on 6m


> Recently my ProII started going to max power out on 6M ONLY when the ptt
> is keyed.
> This happens in all modes regardless of the position of the rf power
> control. I have
> verified the that the swr on antenna is 1.2.  If I engage the tuner the
> radio operates
> normal in rtty/cw but will still peg power out in ssb regardless of rf
> power control.
>
> I have borrowed a friends Pro II and connected everything the same and
> it works properly.
>
> Any help in troubleshooting this will be appreciated.
>
> Dick K4UTE
>
> _________________________________________
> Richard Hicks
> K4UTE at arrl.net
> http://www.nfdxa.com/k4ute/k4ute.html
> _________________________________________
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>