[ICOM] Icom 765 -- No audio in the SSB, CW or RTTY Modes

[Frank A. Ellis]

Ron,

Sounds like a BFO problem, perhaps someone on the list
has a service manual and can look it up. If I had one
I would be happy to.

Good luck!

73 Frank W3UHF



--- RM <kamar at inr.net> wrote:

> I have an Icom 765 that does not have audio in the
> LSB, USB, CW, and RTTY
> modes.  The S-Meter is showing good signals. 
> However, when I switch the
> radio to AM or FM I have full audio (I am currently
> listening comfortably to
> an 75 meter AM QSO at 20-30 over S-9 with the audio
> control turned to about
> the 0900 o'clock position.)
> 
> If I switch to SSB, CW or RTTY I do not hear the QSO
> no matter were the
> volume control is set.   NOTE: that when I tune in a
> SSB or CW station in AM
> mode I have do not have any problem with the audio. 
> When switch to SSB mode
> (or CW or RTTY) I can not hear the SSB station.
> 
> Any suggestions will be greatly appreciated.
> 
> 
> Ron ..... NU1U
> 
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 



	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com