[ICOM] Pro II Dual Watch

[MikeR]

Paul -
Thanks for the tip. The problem turned out to be the loose screw behind 
the mic........
73, Mike NF4L
paul at w8aef.com wrote:

> A quick check on the dual watch function is to tune in a signal with 
> the radio not in split or dual watch, press (and hold for a couple of 
> seconds) DUAL WATCH.  This will place both VFO's on the same frequency.
>
> Then rotate the BAL control through it's range.
>
> If you hear your station at both ends of the BAL pots range, the dual 
> watch function is working OK.
>
> de Paul, W8AEF
>
> ----- Original Message ----- From: "MikeR" <nf4l at nf4l.com>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Monday, October 10, 2005 6:10 PM
> Subject: [ICOM] Pro II Dual Watch
>
>
>> The dual watch on my PRO II seems to be busted. The balance control 
>> has no effect. If dual watch is on, and the sub VFO is tuned to a 
>> signal, the audio pretty well overrides the main VFO.
>> Have I messed up a menu setting, or ????
>> Thanks & 73,
>> Mike NF4L 
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>