[ICOM] IC-2710H VHF Output Power ?

[Bryce P Rumery]

Try:

http://www.marcucci.it/english/download/index.htm

Just tried it and it worked (10/9/05 2009 EDT)

Bryce, K1GAX

On Sun, 9 Oct 2005 19:49:59 -0400 "Rob" <rob at gallagher.net> writes:
> Thanks Adam.
> 
> I did try that URL but I keep getting an error message......
> 
> Rob
> 
> ----- Original Message -----
> From: "Adam Farson" <farson at shaw.ca>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Sunday, October 09, 2005 7:47 PM
> Subject: RE: [ICOM] IC-2710H VHF Output Power ?
> 
> 
> > Hi Rob,
> >
> > You can download the IC-2710 service manual here (30 MB):
> >
> > http://www.marcucci.it/english/download/
> >
> > Cheers for now, 73,
> > Adam VA7OJ/AB4OJ
> >
> >
> > -----Original Message-----
> > From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net]
> On
> > Behalf Of Rob Gallagher
> > Sent: 09 October 2005 13:21
> > To: ICOM Reflector
> > Subject: [ICOM] IC-2710H VHF Output Power ?
> >
> > I just got an almost new condition IC-2710H.  Output on UHF is 
> right where
> > it should be. However,  The VHF side is only at 25 watts.  All the 
> power
> > setting appear low for the VHF side.  Using the internal POT to 
> turn it up
> > does not provide any change other then being able to turn it down 
> further.
> >
> > I would think it might be the power output module but the failures 
> I have
> > see with those tend to be sub-1watt type of output.
> >
> > I don't have a copy of the service manual.  Any input is greatly
> > appreciated.
> >
> > Rob- W3RG
> >
> > BTW, I did get two of these units the other one works as it 
> should.
> >
> >
> >
> > Scanned for viruses by Blue Coat
> > http://www.WinProxy.com/
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
>