[ICOM] Icom 706 MKII G and 440

[John Geiger]

And are you sure that the PL decode (tone squelch) is turned off?  That
would also keep you from hearing the repeater.

----- Original Message -----
From: "Tom" <tmcsail at sbcglobal.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Monday, November 21, 2005 3:16 PM
Subject: Re: [ICOM] Icom 706 MKII G and 440


> This kind of question is always tough, Ed.
> I've always thought my 706 mk2g does FB on 440.
> You need to be ready for hear some questions from the
> group that may insult your intelligence - please don't
> be offended - only good intentions here.
>
> First - are you sure the antenna (for the 706)is
> resonant and the feed line is good? Can you plug the
> HT into the antenna you are using for the 706 to
> verify this?
>
> Forgive me for asking this one - (since you can't even
> hear the repeater??) are you sure the ant is plugged
> into the correct ant connection.
>
> Here's a good experiment: using your friends 706 or
> the HT, program one of the radios to receive on the
> repeaters input freq and tx on its output. Does that
> work? that is, can you have a QSO between your radio
> and the "repeater programmed" radio?
>
> Can you key ANY repeater with the 706? Are you sure
> you are sending the right PL?
>
> so.. there probably isn't anything you haven't tried
> here but - bottom line: ought'a work good.
>
> best of luck...73
> Tom, W3TMC
>
> --- Ed Yeary W4TEY <w4tey at bellsouth.net> wrote:
>
> > Just wondering. What has been your experience with
> > this radio on 440? Mine sucks and so does one of my
> > friends. It won't key or hear a repeater 30 miles
> > away. Same repeater can be worked full quieting with
> > an HT from the same distance.
> > Ed Yeary W4TEY
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> > icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>