[ICOM] Icom PW1 SWR Metering Failure

[Jim W7RY]

Replace it with a standard leaded component.

Judging from the pictures, room should not be an issue.

73
Jim W7RY


At 09:56 AM 5/30/2005, you wrote:
>Thanks Mike, excellent work.
>
>Wonder if Icom will send out the resistor to me to save the amp the trip
>across the country?
>Any suggestions on how to approach this?
>
>And is there a specific part number for the resistor?
>
>Tnx es 73 Bruce W1UJR
>
>-----Original Message-----
>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
>Behalf Of Mike Mellinger WA0SXV
>Sent: Monday, May 30, 2005 10:19 AM
>To: 'ICOM Reflector'
>Subject: RE: [ICOM] Icom PW1 SWR Metering Failure
>
>I found two pictures of the problem -- one from my amp (s/n 1124) and one
>from s/n 1146.  You can view them at:
>
>http://www.wa0sxv.us/pw1_1146.jpg
>http://www.wa0sxv.us/pw1-resistor-large.jpg
>
>
>73,
>Mike WA0SXV
>
>
>
>-----Original Message-----
>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
>Behalf Of Bruce J. Howes
>Sent: Monday, May 30, 2005 08:07
>To: 'ICOM Reflector'
>Subject: RE: [ICOM] Icom PW1 SWR Metering Failure
>
>Hi Mike,
>
>Yes, by all means please post.
>If I can do it, have worked with SMD before, saves the trip back to Icom.
>
>73 Bruce W1UJR
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
>Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/