[ICOM] IC-W31A

[DAN COTSIRILOS KC9HNI]

Doug I found it!! thank you so much!!!  Dan




----- Original Message ----- 
From: "Doug Faunt N6TQS +1-510-655-8604" <faunt at panix.com>
To: <icom at mailman.qth.net>
Cc: <icom at mailman.qth.net>
Sent: Wednesday, May 18, 2005 2:16 PM
Subject: Re: [ICOM] IC-W31A


> Hm, I've got the orginal service manual, which has the PC board
> printed in pink, dark grey, light grey and black, so don't know if I
> could scan it usefully.
>
> But I'll describe it as best I can from the manual, I'm not going to
> open up the radio to see what it really looks like.
>
> On the logic board, bottom view, on the end where the tone squelch
> plugs in at the bottom right, almost at the center going up, just to
> the left of the tsquelch connector to the left, there should be a
> patch of board, rectangular with clipped corners.  Jsut to the right
> of that are two three-lead SMD packages.  The lower of the two is D15.
> There's another three lead package below that, D1.
>
> If that doesn't help, I'm willing to TRY to scan that bit of the
> manual, and mail it.
>
> 73, doug
>
>   From: "DAN COTSIRILOS KC9HNI" <dcsfree at worldnet.att.net>
>   Date: Wed, 18 May 2005 13:39:57 -0500
>
>   Doug
>
>   so it is D15? if so can you give me a aprox location for it?  Dan
>
>   ----- Original Message ----- 
>   From: "Doug Faunt N6TQS +1-510-655-8604" <faunt at panix.com>
>   To: <icom at mailman.qth.net>
>   Cc: <icom at mailman.qth.net>
>   Sent: Wednesday, May 18, 2005 1:16 PM
>   Subject: Re: [ICOM] IC-W31A
>
>
>   > I've got it in mine, for TX in the European and satellite part of
>   > 70cm.  I think I had MTS do it, but I also had the parts for 1750Hz
>   > European repeater tone added at the same time.
>   >
>   > I also have the service manual, so finding D15 was easy enough, too.
>   >
>   > 73, doug
>   >
>   >   From: "DAN COTSIRILOS KC9HNI" <dcsfree at worldnet.att.net>
>   >   Date: Wed, 18 May 2005 12:25:00 -0500
>   >
>   >   Has anyone ever done the extended TX coverage on the IC-W31A? This 
> unit
>   > was
>   >   made before the 440 band was extended to 420 so any help will be
>   > grateful.
>   >   BTW I can't make heads or tails of what the MODS.dk mod is. it is 
> way
>   > too
>   >   confusing.  Dan
>   >
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/