[ICOM] IC-756 pro Po Light

[Adam Farson]

JV, Gerry,

The LED is off when the softkey is set to the default value (in this case Po
for the [METER] key.) It is lit when any non-default value is selected. This
is normal for all 756Pro-series models.

Cheers for now, 73,
Adam VA7OJ/AB4OJ



-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Gerard L Krul.
Sent: 13 May 2005 10:10
To: ICOM Reflector
Subject: Re: [ICOM] IC-756 pro Po Light

JV.
Same on my PRO II, that's the way it suppose to be.
Regards, Gerry ve6wg.
----- Original Message -----
From: "JV" <kt4u at adelphia.net>
To: "Z Icom" <icom at mailman.qth.net>
Sent: Friday, May 13, 2005 10:20 AM
Subject: [ICOM] IC-756 pro Po Light


>    Just noticed that the Po led on the meter switch is not on. The leds 
> ALC
> SWR and Comp  are OK. Anyone else have this problem and if so what is the
> fix.
> JV
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


Scanned by WinProxy
http://www.Ositis.com/