[ICOM] For sale or trade

[Larry Winslow]

Adam,

I went to the "oldicom" link you provided and then clicked on the PBT link 
under the IC-765. Oooops, it goes to some sort of shopping page.

73 - Larry WØNFU
larry_w at comcast.net


At 11:29 AM 5/9/2005, you wrote:

>Hi Sandy,
>
>The following link may be helpful:
>
>http://www.qsl.net/ab4oj/icom/oldicom.html
>
>The IC-718 probably has a quieter synthesiser than any of the radios you
>mentioned, as it uses a newer DDS chipset. The IC-736 has a truly abominable
>(and useless) audio notch filter.
>
>The IC-765 is still a very good radio, but it desperately needs the W2ISB
>PBT modification. Also, earlier serial numbers (S/N < 3000) exhibit severe
>passband ripple in the 9 MHz IF. I ran into this when I did the PBT mod on
>my IC-765, back in 1991.
>
>Another point to consider: parts for these older radios are in short supply,
>and may be "NLA" in some cases. If you wish to upgrade, you may be best off
>with one of the Icom Pro-series DSP-based transceivers; they are still fully
>supported.
>
>Cheers for now, 73,
>Adam VA7OJ/AB4OJ
>
>
>-----Original Message-----
>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
>Behalf Of martin sandberg
>Sent: 09 May 2005 07:17
>To: 'ICOM Reflector'
>Subject: [ICOM] For sale or trade
>
>I have a nearly new, IC-718 transceiver (with DSP), AT-180 auto tuner and
>PS-125 power supply for sale or trade. This combination can be used mobile
>or fixed base. All are 9,9 on a scale of 10.0. I am looking for a 736, 746
>or 765. Please contact me at sandytex at swbell.net.
>
>All the best,
>Martin "Sandy" Sandberg
>N5NBW in Dallas Texas
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
>Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>
>
>Scanned by WinProxy
>http://www.Ositis.com/
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/