[ICOM] ICOM IC 756 Pro II

[N5NF Watt]

I think you are refering to the amount of dbs you can reduce the screen to.
Whebn ver strong sinals are present press the button right below to
attenuate the screen so that you can read it better.  To much reduction will
make youlose the ability to see the weak signals though so use it with
discression.  I was a while before I discovered this feature also.  Pretty
neat.  Also when you press filter and hold it you can go in and see what you
have your filters set up for.  Watt  Pretty neat.
----- Original Message ----- 
From: "Tony Lord" <tony.lord at lfpuk.co.uk>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Friday, March 25, 2005 12:37 PM
Subject: [ICOM] ICOM IC 756 Pro II


Hi all,

A simple question, I hope. When the rig is in SCOPE mode, on the left of the
spectrum scope are some numbers/letters depending what one has selected.
First is GRID info. Under Grid info it says 10dB. What does this refer to??
Is it strength of incoming signals?? i.e. 10dB per horizontal line??

Silly question but its something I have only just noticed.

73's de Tony G8DQZ.


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/