[ICOM] Ic-706IIG HM--103 Microphone

[Oldtimer]

Thank you, Mike. The only trouble is that you show five leads including the 
shield. I have six leads and one of them is red, which you do not show. I am 
confused about that. I do appreciate your help.

73 de Jim, K5ROV

James (Jim) Parsons, CMSgt, USAF, Ret.
Ham for over 60 years, 80 % CW, 10 % digital, 10 % SSB
ARMS, ARRL,  Ex: W1RLA, K5FBB, K4FEO,
SV0WN (Crete), SV0WN (Rhodes), DL4NC, DL4JP, KA2FC (Japan) ,
KA2JP (Japan).
John 3-16


----- Original Message ----- 
From: "Michael P. Olbrisch" <mike2004 at elp.rr.com>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Thursday, March 24, 2005 5:25 PM
Subject: RE: [ICOM] Ic-706IIG HM--103 Microphone


>
>
>> -----Original Message-----
>> From: icom-bounces at mailman.qth.net
>> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Oldtimer
>> Sent: Thursday, March 24, 2005 11:01 PM
>> To: Icom
>> Subject: [ICOM] Ic-706IIG HM--103 Microphone
>>
>> My HM-103 microphone plug for the IC-706IIG had the hasp
>> broken off.
>
> I am holding an HM-103 in my hand.
>
> Looking at the RJ-45 - locking tab down - pins to the top - cord to the
> bottom - pins left to right are:
>
> 1.  Blank (NC)
>
> 2.  Black
>
> 3.  Blank (NC)
>
> 4.  Green
>
> 5.  Shield
>
> 6.  White
>
> 7.  Blue
>
> 8.  Blank (NC)
>
> Hope this helps.
>
> Mike.  KD9KC
> El Paso, TX.
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>