[ICOM] Ic-706IIG HM--103 Microphone

[Van van Bergen]

You might want to check the new RJ45 plug from R/S and make sure if fits in 
the radio. There are some different RJ/45 plugs out there.

73
Van
WD5FGB

----- Original Message ----- 
From: "Oldtimer" <res075cz at gte.net>
To: "Icom" <icom at mailman.qth.net>
Sent: Thursday, March 24, 2005 3:00 PM
Subject: [ICOM] Ic-706IIG HM--103 Microphone


My HM-103 microphone plug for the IC-706IIG had the hasp broken off. I went
to Radio Shack and got another plug but when I tried to get the color code
for the plug I ended up destroying the original. You would think that after
60 years of hamming I would be able to do a better job than I am doing.

Anyway, I cannot find the color code for the RJ-45 plug. The microphone has
a
red wire but I see no red wire in the old plug. Also there are two shield
connections (red and gold) but I cannot find where they go in the old plug.
In the owners manual there are no color codes given at all, that I can find.

Can someone help me find where the colors go in the RJ-45 plug.  I  sure
need your help and  I would appreciate it. I used to do a much better job of
fixing things but I am afraid those days are gone forever.

Thank you for your help...

73 de Jim, K5ROV

James (Jim) Parsons, CMSgt, USAF, Ret.
Ham for over 60 years, 80 % CW, 10 % digital, 10 % SSB
ARMS, ARRL,  Ex: W1RLA, K5FBB, K4FEO,
SV0WN (Crete), SV0WN (Rhodes), DL4NC, DL4JP, KA2FC (Japan) ,
KA2JP (Japan).
John 3-16



----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/