[ICOM] Re Icom 2KL and AT-500

[Richard Thorne]

Duane:

I can't help with locating an amp and tuner, but I do have a suggestion 
for interfacing his Kenwood rig with the Icom Amp for auto band 
changing.

Check out http://www.microham.com and look at the band decoder.  It has 
the ablity to be connected to his Kenwood rig (assuming the rig he has 
is supported) and an Icom or Yaesu amplifier for auto band changing.

I'm using one for my remote controlled station.  Its connected to my 
Kenwod TS-480.  It reads what band the 480 is on and in turn controls my 
antenna switch.  It also has an output to send band signals to the 
IC-2KL for auto band switching there.

73,

Rich - N5ZC

----- Original Message ----- 
From: "Duane B. Fischer, W8DBF" <dfischer at usol.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, March 22, 2005 9:54 PM
Subject: [ICOM] Re Icom 2KL and AT-500


>I was contacted by a blind Ham who would like to purchase a fully 
>operational
> Icom 2KL with power supply and the matching AT-500 automatic tuner. 
> Now he is
> using a Kenwood, is it still doable? He would like 'decent' cosmetics, 
> but
> insists that all pieces are in excellent electrical condition and 
> working
> properly. manuals, original or a copy, will be needed. however, they 
> can be
> gotten elsewhere if the seller does not have them.
> This Ham is a serious buyer, not interested in wasting anyone's time, 
> or having
> his wasted either.
> If someone on the Icom list, or someone else, has the equipment and is
> interested in selling it, please have them contact me. i will forward 
> all
> responses direct to the interested buyer. he will contact them from 
> that point
> on.
> Duane Fischer, W8DBF dfischer at usol.com
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/