[ICOM] IC 775DSP Q

[Rick Robinson]

I would assume it is like a lot of other Icoms. Be sure to place the 
unit in the cw mode , then, go into the set mode for the key type. 
Rotate the knob that controls the selection and you should see "bug". 
Being in the right mode before you try to change the settings is the 
key. Look at the set mode flow charts and you should see it there. GL, 
Rick. W8ZT.

Malcolm Ringel wrote:
> Presuming it is possible (and most late model Icom HF XCVR's have this 
> feature), how do I enable/set the rig's internal cw keyer to a "bug" 
> function ?
> I have read and re-read the manual (which doesn't mean it's not in 
> there) and I have played with the rig and the Vibroplex electronic (not 
> orig type) keyer, all without success. Does it have to do with the front 
> vs back key jack ? Can it be done ? Is it in the book ? Do they call it 
> something else ?
> Thanks for any assistance...........
> 73
> Malcolm, K3KZ
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
>