[ICOM] IC-2710H Transmit Audio Too Hot

[Fern Rivard]

Yes ok Mac  BUT my point here is that Icom should NOT have shipped those
radios without doing the modifications themselves! In my book that is
very poor quality control on Icom's part.
    Fern



----- Original Message ----- 
From: "D C Macdonald" <k2gkk at hotmail.com>
To: <icom at mailman.qth.net>
Sent: Sunday, January 30, 2005 10:25 AM
Subject: Re: [ICOM] IC-2710H Transmit Audio Too Hot


> I already posted the info on the VERY simple change
> in the microphone needed to fix this.
>
> I have two 2710s and Icom sent me two
> resistors to modify the mic.
>
>
> Mac, K2GKK/5
>
>
>
> ----Original Message Follows----
> From: "Fern Rivard" <crc at cyberlink.bc.ca>
> Reply-To: ICOM Reflector <icom at mailman.qth.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Subject: Re: [ICOM] IC-2710H Transmit Audio Too Hot
> Date: Sun, 30 Jan 2005 11:20:34 -0800
>
> Yes John, I had a number of IC-2100H mobiles and found that the dtmf
> levels were around +- 4 khz (which is way too high) so in order to get
> the dtmf levels correct at +- 3khz, I had to turn the main deviation
> down to +- 4 khz.  Also, there is no provision in the dtmf mic to take
> care of that.  That's a very  poorly designed radio in my books
without
> that adjustment.
>      My 2 cents worth from Fern
>
>
>
> ----- Original Message -----
> From: "K9GPS-Lists" <k9gps-lists at earthlink.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Sunday, January 30, 2005 5:30 AM
> Subject: RE: [ICOM] IC-2710H Transmit Audio Too Hot
>
>
>  > John,
>  >
>  > The menu should have a hi/low mic gain setting like my IC208. Check
>  > your manual. If that does not do it, forget it, there are no
>  > adjustments you can make. Icom will only release the required
software
>  > to an "authorized repair center". I had that argument numerous
times
>  > with Icom and their reps at some hamfests. I no longer purchase
Icom
>  > radios due to this issue and the excessive mic gain on IC2000,
IC2100
>  > and the IC207H models. At least I can fix the older models by
changing
>  > a resistor on the mic amp.
>  >
>  > K9GPS Lee
>  >
>  >
>  >
>  > -----Original Message-----
>  > From: icom-bounces at mailman.qth.net
>  > [mailto:icom-bounces at mailman.qth.net]On Behalf Of John Chesley
>  > Sent: Saturday, January 29, 2005 10:34 PM
>  > To: 'ICOM Reflector'
>  > Subject: [ICOM] IC-2710H Transmit Audio Too Hot
>  >
>  >
>  > The microphone on my IC-2710H mobile is overdriving the radio.  The
>  > mic is
>  > so sensitive that I have to hold it 1 foot away to get reasonable
>  > transmit
>  > audio levels.  I have verified this on a service monitor.  Since I
do
>  > not
>  > have a service monitor for the rig, can anyone tell me what trimmer
or
>  > control inside of the radio to adjust to set the transmit audio
levels
>  > back?
>  >
>  > Thanks.
>  >
>  > John, AK3Z
>  > ----
>  > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>  > Win a new Icom IC-756 PRO III and help QSL/QTH.net
>  > Details at: http://mailman.qth.net/
>  >
>  > ----
>  > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>  > Win a new Icom IC-756 PRO III and help QSL/QTH.net
>  > Details at: http://mailman.qth.net/
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.7.4 - Release Date: 01/25/2005
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Win a new Icom IC-756 PRO III and help QSL/QTH.net
> Details at: http://mailman.qth.net/
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Win a new Icom IC-756 PRO III and help QSL/QTH.net
> Details at: http://mailman.qth.net/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.8.2 - Release Date: 01/28/2005
>
>



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.2 - Release Date: 01/28/2005