[ICOM] Fw: PROII & SB200

[Paul Erickson]

I would suggest putting a soft key mod in such as the one from Harbach, 
so that any rig can key it properly.


-- 
----------------------------------------------------------------
cheers, Paul - VA7NT - email: va7nt at telus.net

"Those who hear not the music, think the dancers mad."



mparkinson1 wrote:
> Funny I am looking for some thing to use to patch between my Pro lll and my
> SB-200.
> I am new to the Ham world and I am a tech but need the equipment to isolate
> the transiever from the SB-200 so I won't fry something.
> Matt
> ----- Original Message -----
> From: "Bert" <balmemo at sympatico.ca>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Monday, February 21, 2005 2:50 PM
> Subject: RE: [ICOM] Fw: PROII & SB200
> 
> 
> 
>>Hi Denis,
>>
>>My suggestion is not to use ALC and reduce the output power from the PRO2
>>instead. I don't remember what drive the SB200 requires for full output
> 
> but
> 
>>guessing 60-70 watts or so.
>>
>>73 Bert, VE3OBU
>>
>>
>>
>>-----Original Message-----
>>From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
> 
> On
> 
>>Behalf Of Denis Christopherson
>>Sent: Monday, February 21, 2005 5:06 PM
>>To: ICOM
>>Subject: [ICOM] Fw: PROII & SB200
>>
>>
>>Subject: PROII & SB200
>>
>>
>>Anyone out there using the PROII with a Heathkit SB200?
>>I have the isolation box to go between the PROII "send control jack" & the
>>amp.  I am wondering if there any issues with the ALC hookup between the 2
>>units  Thanks in advance for any help.
>>
>>Denis, K9JIG
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
>>Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>