[ICOM] Fw: PROII & SB200

[Denis Christopherson]

Matt:
Check www.theheathkitshop.com for their Ampkeyer.  Cheaper than Ameritron's
box & it has a standby switch.
Denis, K9JIG
----- Original Message -----
From: "mparkinson1" <mparkinson1 at socal.rr.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Monday, February 21, 2005 5:23 PM
Subject: Re: [ICOM] Fw: PROII & SB200


> Funny I am looking for some thing to use to patch between my Pro lll and
my
> SB-200.
> I am new to the Ham world and I am a tech but need the equipment to
isolate
> the transiever from the SB-200 so I won't fry something.
> Matt
> ----- Original Message -----
> From: "Bert" <balmemo at sympatico.ca>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Monday, February 21, 2005 2:50 PM
> Subject: RE: [ICOM] Fw: PROII & SB200
>
>
> > Hi Denis,
> >
> > My suggestion is not to use ALC and reduce the output power from the
PRO2
> > instead. I don't remember what drive the SB200 requires for full output
> but
> > guessing 60-70 watts or so.
> >
> > 73 Bert, VE3OBU
> >
> >
> >
> > -----Original Message-----
> > From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
> On
> > Behalf Of Denis Christopherson
> > Sent: Monday, February 21, 2005 5:06 PM
> > To: ICOM
> > Subject: [ICOM] Fw: PROII & SB200
> >
> >
> > Subject: PROII & SB200
> >
> >
> > Anyone out there using the PROII with a Heathkit SB200?
> > I have the isolation box to go between the PROII "send control jack" &
the
> > amp.  I am wondering if there any issues with the ALC hookup between the
2
> > units  Thanks in advance for any help.
> >
> > Denis, K9JIG
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
Users
> > Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>