[ICOM] Fw: PROII & SB200

[mparkinson1]

Funny I am looking for some thing to use to patch between my Pro lll and my
SB-200.
I am new to the Ham world and I am a tech but need the equipment to isolate
the transiever from the SB-200 so I won't fry something.
Matt
----- Original Message -----
From: "Bert" <balmemo at sympatico.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Monday, February 21, 2005 2:50 PM
Subject: RE: [ICOM] Fw: PROII & SB200


> Hi Denis,
>
> My suggestion is not to use ALC and reduce the output power from the PRO2
> instead. I don't remember what drive the SB200 requires for full output
but
> guessing 60-70 watts or so.
>
> 73 Bert, VE3OBU
>
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
On
> Behalf Of Denis Christopherson
> Sent: Monday, February 21, 2005 5:06 PM
> To: ICOM
> Subject: [ICOM] Fw: PROII & SB200
>
>
> Subject: PROII & SB200
>
>
> Anyone out there using the PROII with a Heathkit SB200?
> I have the isolation box to go between the PROII "send control jack" & the
> amp.  I am wondering if there any issues with the ALC hookup between the 2
> units  Thanks in advance for any help.
>
> Denis, K9JIG
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>