[ICOM] Loose parts

Woody kj4so at nc.rr.com
Wed Feb 2 13:40:45 EST 2005


Hi Mike:

The spring should be soldered to the metal shield shown in your photo.  The brown "stuff" is most likely solder flux instead of glue.

73,

Woody
KJ4SO
  ----- Original Message ----- 
  From: MikeR 
  To: ICOM Reflector 
  Sent: Wednesday, February 02, 2005 1:07 PM
  Subject: [ICOM] Loose parts


  I picked up the PRO II to do some cleaning. When I let it go vertical, I 
  heard something loose in the case. I took the bottom cover off, and 
  discovered a spring loose. It appears to have been cemented to another 
  component, and used as a ground contact against the bottom cover.
  Pix at http://nf4l.com/pro_ii.htm
  How important is this piece, and how best to re-attach it?
  Thanx!
  Mike NF4L

  ----
  Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
  Icom Users Net: Sundays, 1700Z, 14.316 MHz
  Icom FAQ: http://www.qsl.net/icom/


More information about the Icom mailing list