[ICOM] Re: Icom IC-718 Review

[AD5VJ Bob]

Thanks guys. 

I guess I told my age, but it has been a while since I
actually built something.

Although, now after my second dunk, I am once again
feeling the joy of it, so we may have started something
dangerous here :0)

The schematic was drawn by a guy with an call from EU so
that answers the international aspect.

My next project is going to be an equalizer for audio
output for my little IC-756PRO since the audio seems to
crackle when on the lower bands for some reason, so it may
be the tiny internal speaker it has.

I am assuming this because:
In my headphones I don't hear it so bad, so I am going to
build an 10 band equalizer with an audio jack for my
headphones and an external speaker and include a phone
patch.

This is fun again!!!

  73 fer nw,
Bob AD5VJ

10X# 37210, FP#-1141, SMIRK#-5177
http://www.n5iet.com/
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.






> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Phil
Atchley
> Sent: Thursday, December 29, 2005 2:19 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] Re: Icom IC-718 Review
> 
> 
> Hi,
> 
> That would be 4.7K.  If it were 4R7 it would be 4.7
Ohms.  
> This is rather 
> common on the international scene now days.
> 
> 
> ******************************************************
> 73 de Phil,  KO6BB
> DX begins at the noise floor!
> 
> THE BEACONEER'S LAIR:  http://www.geocities.com/ko6bb/
> QSL GALLERY: http://photobucket.com/albums/y123/KO6BB/
> Merced, Central California,    37.3N  120.48W  CM97sh
> 
> ******************************************************
> 
> 
> 
> I have found a schematic that I think I have all the
parts
> for.
> 
> The only problem is:
> There are three resistors included in the schematic that
I
> am not familiar with the designator for as it is being
> used by the designer.
> 
> "4k7"
> 
> Is what is written next to the resistors.
> 
> Is this
> 4.7 K ohms
> 4.7 Ohms
> Or 4K and the 7 is a typo?
> 
> 
> 
>   73 fer nw,
> Bob AD5VJ
> 
> icom/ 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom Users Net: Sundays,
1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>