[ICOM] OPC-168

[Trevor Pitman]

Thanks for the help Adam
73 and all the best for the new year
Trevor

----- Original Message ----- 
From: "Adam Farson" <farson at shaw.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Thursday, December 29, 2005 6:57 PM
Subject: RE: [ICOM] OPC-168


> Hi Trevor,
>
> Pin 5 of the 7-pin V-200 mic plug is connected to the ring of the 2.5mm
> plug.
>
> Pin 6 of the 7-pin V-200 mic plug is connected to the sleeve of the 2.5mm
> plug.
>
> Looking at the front of the 7-pin plug (pin side), Pin 1 is just to the 
> left
> of the keyway.
>
> I have the whole family of these radios - V-100, U-400, H-16, U-16, V-200,
> U-200. I use them on the 2m and 70cm amateur bands, as they are
> intermod-free.
>
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] 
> On
> Behalf Of Trevor Pitman
> Sent: 28 December 2005 21:30
> To: icom at mailman.qth.net
> Subject: [ICOM] OPC-168
>
> Hello group
> Can any one help!!!
> Looking for circuit for a OPC-168 cloning cable to clone a IC -V200
> 73
> Trevor VK3VG
>
>
>
> Scanned for viruses by Blue Coat
> http://www.WinProxy.com/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/