[ICOM] OPC-168

[Adam Farson]

Hi Trevor,

Pin 5 of the 7-pin V-200 mic plug is connected to the ring of the 2.5mm
plug. 

Pin 6 of the 7-pin V-200 mic plug is connected to the sleeve of the 2.5mm
plug. 

Looking at the front of the 7-pin plug (pin side), Pin 1 is just to the left
of the keyway.

I have the whole family of these radios - V-100, U-400, H-16, U-16, V-200,
U-200. I use them on the 2m and 70cm amateur bands, as they are
intermod-free.

Cheers for now, 73,
Adam VA7OJ/AB4OJ


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Trevor Pitman
Sent: 28 December 2005 21:30
To: icom at mailman.qth.net
Subject: [ICOM] OPC-168

Hello group
Can any one help!!!
Looking for circuit for a OPC-168 cloning cable to clone a IC -V200
73
Trevor VK3VG



Scanned for viruses by Blue Coat
http://www.WinProxy.com/