[ICOM] ct17 to 706MKIIG

[MikeR]

Gordon -
I'm using a different interface, and different radio, but my comm port 
settings are
databits 8 stopbits 2 no parity.
Does logger want the address in decimal or hex? If it's decimal then the 
address should be 88.
HTH & 73
Mike NF4L

Gordon Bostrom wrote:

>still have problems with connecting the radio thru the ct17 to the computer. maybe someone has had the same problem. so here is the info:
>
>software  logger32 ver 2.6
>
>computer settings:
>port  com1
>baud 19200
>radio not ic735
>databit 8  stopbit 1  parity none
>polling 400
>address  58
>
>radio :
>
>civ address  58H
>baud 19200
>civ transceivce   off
>
>the interface is ct17.
>my 751a worked fine and I was able to connect the 706 thru the 751 and changed addredss all worked fine, but now I went back to connecting the 751a and the radio to it and now it will not work???
>
>Boy I have only a few hairs left so any help willbe greatly apppreciated
>
>Gordon w4KYW
>
>
>Forget about yesterday dont worry about tomorrow live for today
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>  
>