[ICOM] IC-756PRO RASCAL/Heil

[AD5VJ Bob]

Hi Larry:

I would very much like that.

Thank you so much for the offer.

Just send it
 to: ad5vj at sbcglobal dot net

That way I will get it faster.



  73 fer nw,
Bob AD5VJ

10X# 37210, FP#-1141, SMIRK#-5177
http://www.n5iet.com/
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.




> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Larry
Winslow
> Sent: Thursday, December 15, 2005 12:15 PM
> To: ICOM Reflector
> Subject: RE: [ICOM] IC-756PRO RASCAL/Heil
> 
> 
> Bob,
> 
> Don't know if you're interested but the CT-17 can 
> be homebrewed for way less than the cost of a new 
> one. I built mine back in the 90s for $13 using 
> all new parts - I skipped the junk box as an 
> experiment to see how much it really cost. I have 
> the diagram which I can email if you wish.
> 
> 73 - Larry WØNFU
> larry_w at comcast.net
> 
> 
> 
> At 09:11 AM 12/15/2005, you wrote:
> 
> >Well the guy sending it to me says a friend of his used
it
> >on a 756PRO.
> >
> >Is it possible that the computer part of it will
connect
> >to the ICOM but not the audio part.
> >
> >In other words can it control the rigs functions (freq,

> filters, ect) 
> >but not send and receive audio?
> >
> >If that is the case I can probably us it as a level
> >converter until I get a CT-17.
> >
> >Or can I?
> >
> >I use the MFJ 1279 for digital audio interfacing anyway

> because I have 
> >never never had any problems with it on feedback or
noise or 
> anything 
> >like that.
> >
> >I understand I can wire it for the IC-756PRO or just
about
> >any rig for that matter so I really like it a lot.
> >
> >The Heil mic has the cable and a foot switch with it
for
> >the IC-756PRO so it should connect up to the MFJ like a

> regular IC Mike 
> >would.
> >
> >
> >
> >   73 fer nw,
> >Bob AD5VJ
> >
> >10X# 37210, FP#-1141, SMIRK#-5177
> >http://www.n5iet.com/
> >Code may be taking a back seat for now,
> >but the pioneering spirit that put the code
> >there in the first place is out front of it all.
> >
> >
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: icom-bounces at mailman.qth.net 
> > > [mailto:icom-bounces at mailman.qth.net] On Behalf Of 
> > > jduerbusch at charter.net
> > > Sent: Thursday, December 15, 2005 7:53 AM
> > > To: ICOM Reflector
> > > Subject: [ICOM] IC-756PRO RASCAL/Heil
> > >
> > >
> > > The R-KW13RY is for Kenwood (KW) 13 pin connector
and
> >has the
> > > extra RCA Plug for RTTY (RY).
> > >
> > > That is the one I have for my TS-850S.  You need the
one
> >for
> > > the IC-756PROIII.  Its partnumber is I8PDRY for Icom
8
> >pin
> > > Din with rtty.
> > >
> > > It looks like Rascals webpage is hard to follow.  I
> >think
> > > Buck must have went to HTML school.
> > >
> > > Hope this helps.  bTW I am using a Rascal with my
PROIII
> >and
> > > it works great!
> > >
> > > Joe K0BX
> > >
> > >
> > >
> > > From: "AD5VJ  Bob" <rtnmi at sbcglobal.net>
> > > Date: 2005/12/15 Thu AM 02:36:14 CST
> > > To: "'ICOM Reflector'" <icom at mailman.qth.net>
> > > Subject: [ICOM] IC-756PRO RASCAL/Heil
> > >
> > > I have a question about a digital interface for an
ICOM 756PRO. I 
> > > cant find any literature on it on the Buxcomm Site.
In fact that 
> > > site confuses me terribly.
> > >
> > > It is the RASCAL R-KW13RY.
> > > Does this sound like the right one for the Icom
756PRO.
> > >
> > >
> > > Stop the insanity!
> > > Please do not add me to any distribution lists
(Joke,
> >Stories
> > > or Junk) without my permission.
> > > ----
> > > Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom 
> > > Users Net: Sundays,
> >1700Z,
> > > 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
> > >
> >
> >
> >----
> >Your Moderator: Dick Flanagan K7VC,
icom-owner at mailman.qth.net Icom 
> >Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> >http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom Users Net: Sundays,
1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>