[ICOM] IC-756PRO RASCAL/Heil

[AD5VJ Bob]

Well the guy sending it to me says a friend of his used it
on a 756PRO.

Is it possible that the computer part of it will connect
to the ICOM but not the audio part.

In other words can it control the rigs functions (freq,
filters, ect) but not send and receive audio?

If that is the case I can probably us it as a level
converter until I get a CT-17.

Or can I?

I use the MFJ 1279 for digital audio interfacing anyway
because I have never never had any problems with it on
feedback or noise or anything like that.

I understand I can wire it for the IC-756PRO or just about
any rig for that matter so I really like it a lot.

The Heil mic has the cable and a foot switch with it for
the IC-756PRO so it should connect up to the MFJ like a
regular IC Mike would.



  73 fer nw,
Bob AD5VJ

10X# 37210, FP#-1141, SMIRK#-5177
http://www.n5iet.com/
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.






> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of 
> jduerbusch at charter.net
> Sent: Thursday, December 15, 2005 7:53 AM
> To: ICOM Reflector
> Subject: [ICOM] IC-756PRO RASCAL/Heil
> 
> 
> The R-KW13RY is for Kenwood (KW) 13 pin connector and
has the 
> extra RCA Plug for RTTY (RY).
> 
> That is the one I have for my TS-850S.  You need the one
for 
> the IC-756PROIII.  Its partnumber is I8PDRY for Icom 8
pin 
> Din with rtty.
> 
> It looks like Rascals webpage is hard to follow.  I
think 
> Buck must have went to HTML school.
> 
> Hope this helps.  bTW I am using a Rascal with my PROIII
and 
> it works great!
> 
> Joe K0BX
> 
> 
> 
> From: "AD5VJ  Bob" <rtnmi at sbcglobal.net>
> Date: 2005/12/15 Thu AM 02:36:14 CST
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Subject: [ICOM] IC-756PRO RASCAL/Heil
> 
> I have a question about a digital interface for an ICOM
> 756PRO. I cant find any literature on it on the Buxcomm
> Site. In fact that site confuses me terribly.
> 
> It is the RASCAL R-KW13RY.
> Does this sound like the right one for the Icom 756PRO. 
> 
> 
> Stop the insanity!
> Please do not add me to any distribution lists (Joke,
Stories 
> or Junk) without my permission.
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom Users Net: Sundays,
1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>