[ICOM] Re: PW-1 and such

[Tony Visco]

Sorry Dr. White,
Within a few seconds I found the Icom CT-17 and all the info.  Thanks again 
for the BIG hint.

Tony

----- Original Message ----- 
From: "Dr. Howard S. White" <drpaper at msn.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Sunday, December 11, 2005 2:31 AM
Subject: Re: [ICOM] Re: PW-1 and such


> Running a PW-1, IC-756 Pro3, SteppIR MonstIR and a couple of Computers
> through a CT-17... all talk together fine...
>
> Have no idea about the Kenwood...
>
> __________________________________________________________
> Howard S. White Ph.D. P. Eng., VE3GFW/K6  ex-AE6SM  KY6LA
> Website: www.ky6la.com
> "No Good Deed Goes Unpunished"
> "Ham Antennas Save Lives - Katrina, 2003 San Diego Fires, 911"
>
> ----- Original Message ----- 
> From: "Tony Visco" <ahv73 at verizon.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Saturday, December 10, 2005 5:58 AM
> Subject: [ICOM] Re: PW-1 and such
>
>
> OK you guys,
>
> Here are my questions of the week.
> I am a new owner of a used PW-1.  I have the amp talking to my 746pro.  I
> also have a Kenwood 940s that I thought I had a way to power up the 
> antenna
> component but no success.  Currently I need to have the 746pro on to 
> operate
> the TS-940.
>
> No. 1:  I tried using a 12V power supply that would come on when the 
> Kenwood
> would turn on.  Nothing happened.  I did connect the pin configuration as
> indicated in the PW-1 manual.  So am I missing something here.
>
> No. 2:  The CI/V connection seems only dedicated to the PW-1.  I can no
> longer jumper my computer interface (TRX Manager) to the rig or my Steppir
> antenna interface.  When I connect the jumper to add the TRX connection to
> my computer, neither works.  I love all these toys but as with computer
> technology in the 1980's the inter-relationships were simply not always
> worked out.  I am anxoius to see if  anyone has a solution for this little
> nusiance.
>
> Thanks in advance and have a very happy holiday season,
> Tony   K 3 I P T
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>